Posts for tag: oral hygiene
Implant-supported fixed bridges are growing in popularity because they offer superior support to traditional bridges or dentures. They can also improve bone health thanks to the affinity between bone cells and the implants' titanium posts.
Even so, you'll still need to stay alert to the threat of periodontal (gum) disease. This bacterial infection usually triggered by dental plaque could ultimately infect the underlying bone and cause it to deteriorate. As a result the implants could loosen and cause you to lose your bridgework.
To avoid this you'll need to be as diligent with removing plaque from around your implants as you would with natural teeth. The best means for doing this is to floss around each implant post between the bridgework and the natural gums.
This type of flossing is quite different than with natural teeth where you work the floss in between each tooth. With your bridgework you'll need to thread the floss between it and the gums with the help of a floss threader, a small handheld device with a loop on one end and a stiff flat edge on the other.
To use it you'll first pull off about 18" of dental floss and thread it through the loop. You'll then gently work the sharper end between the gums and bridge from the cheek side toward the tongue. Once through to the tongue side, you'll hold one end of the floss and pull the floss threader away with the other until the floss is now underneath the bridge.
You'll then loop each end of the floss around your fingers on each hand and work the floss up and down the sides of the nearest tooth or implant. You'll then release one hand from the floss and pull the floss out from beneath the bridge. Rethread it in the threader and move to the next section of the bridge and clean those implants.
You can also use other methods like specialized floss with stiffened ends for threading, an oral irrigator (or "water flosser") that emits a pressurized spray of water to loosen plaque, or an interproximal brush that can reach into narrow spaces. If you choose an interproximal brush, however, be sure it's not made with metal wire, which can scratch the implant and create microscopic crevices for plaque.
Use the method you and your dentist think best to keep your implants plaque-free. Doing so will help reduce your risk of a gum infection that could endanger your implant-supported bridgework.
If you would like more information on implant-supported bridges, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Oral Hygiene for Fixed Bridgework.”
After months of treatment we’ve removed your braces and your new smile emerges. Upon closer view, however, you notice a number of chalky white spots on your teeth.
These pale areas are white spot lesions (WSLs), the result of mineral breakdown from the long-term contact of acid with the enamel surface. The underlying cause is built-up bacterial plaque due to inadequate oral hygiene, and as such WSLs are the beginning stages of tooth decay.
While anyone can develop WSLs, brace wearers are highly susceptible because of the extra care required to clean around orthodontic hardware. Poor dietary habits such as frequent snacking on sugary or acidic foods and beverages also increase the risk of WSLs.
To reduce the risk of developing this condition, brace wearers must give extra attention and effort to daily oral hygiene, including brushing and flossing. The extra effort required in brushing can be aided by specialized toothbrushes designed to clean around brackets and wires, along with prescription-level fluoride toothpastes for added enamel strength. Floss threaders or a water flosser, a device that uses pulsating water under high pressure, may help you maneuver around hardware to remove plaque between teeth. It's also important to maintain a healthy mouth environment by limiting intake of sugary or acidic snacks and beverages, avoiding tobacco or excessive alcohol or caffeine, and drinking plenty of water to keep your mouth from drying out.
If you’ve already developed lesions, it’s important to stop the decay process before it causes more damage. One way is to assist your body’s natural mechanism for re-mineralizing tooth enamel with fluoride pastes or gels or re-mineralizing agents, or undergoing micro-abrasion to repair a tooth’s surface.
To improve a tooth’s appearance a procedure known as “caries infiltration” involves injecting a liquid tooth-colored resin into the lesion, which is then hardened with a curing light. The spot becomes less noticeable and appears more like normal enamel. For extensive defects, conventional bonding with composite resins or porcelain veneers can be used to cosmetically cover the tooth.
Getting ahead of the problem with effective oral hygiene and good dietary and lifestyle practices will keep WSLs at bay while you undergo orthodontic treatment. If they do develop, however, there are ways to minimize their effect and restore the look of your teeth.
After months of wearing braces it's time for the big reveal: your new and improved smile! Your once crooked teeth are now straight and uniform.
But a look in the mirror at your straighter teeth might still reveal something out of place: small chalky-white spots dotting the enamel. These are most likely white spot lesions (WSLs), points on the enamel that have incurred mineral loss. It happens because mouth acid shielded by your braces contacted the teeth at those points for too long.
Most mouth acid is the waste product of bacteria that thrive in dental plaque, a thin film of food particles that can build up on tooth surfaces. High levels of acid are a definite sign that plaque hasn't been removed effectively through brushing and flossing.
But normal hygiene can be difficult while wearing braces: it's not easy to maneuver around brackets and wires to reach every area of tooth surface. Specialized tooth brushes can help, as well as floss threaders that help maneuver floss more easily through the wires. A water irrigator that uses pulsating water to remove plaque between teeth is another option.
However, if in spite of stepped-up hygiene efforts WSLs still develop, we can treat them when we've removed your braces. One way is to help re-mineralize the affected tooth surfaces through over-the-counter or prescription fluoride pastes or gels. It's also possible re-mineralization will occur naturally without external help.
While your teeth are sound, their appearance might be diminished by WSLs. We can improve this by injecting a liquid tooth-colored resin below the enamel surface. After hardening with a curing light, the spot will appear less opaque and more like a normal translucent tooth surface. In extreme cases we may need to consider porcelain veneers to cosmetically improve the tooth appearance.
In the meantime while wearing braces, practice thorough dental hygiene and keep up your regular cleaning visits with your general dentist. If you do notice any unusual white spots around your braces, be sure to see your dentist or orthodontist as soon as possible.
If you would like more information on dental care during orthodontic treatment, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “White Spots on Teeth during Orthodontic Treatment.”
In October, the American Dental Hygienists’ Association sponsors National Dental Hygiene Month to remind everyone that having good oral health is directly related to practicing good oral hygiene at home. This includes brushing twice each day with fluoride toothpaste and flossing at least once per day. But sometimes we forget that dental hygiene applies not just to your teeth but also to anything you regularly wear in your mouth. This includes removable dentures (full or partial), clear aligners, nightguards, mouthguards and retainers. If you (or your kids, or seniors you know) wear any of these, please review the three appliance-care tips below.
1. CLEAN IT. Just like natural teeth, an oral appliance worn every day needs daily brushing. But toothpaste isn’t an appropriate cleanser for these devices; it’s too abrasive. The grainy particles it contains are great for scrubbing plaque and bits of food from the hard enamel coating of teeth—but they can actually leave little nicks in the plastic of your oral appliance, creating areas for bacteria to hide. This can eventually cause odors and stains. Instead, clean appliances with liquid dish soap or denture paste. Buy a separate brush for your appliance—don’t use the same one that you use on your teeth. It can be a very soft regular toothbrush, nail brush or denture brush.
2. RINSE IT. After cleaning your appliance, rinse it thoroughly. But don’t use hot water—and never boil an oral appliance to sterilize it! Your device was custom-made for your mouth, and it needs to fit precisely to do its job. Hot water can warp the appliance and change the fit, possibly rendering it useless or even harmful. For example, a warped orthodontic aligner might not move teeth into the correct position. Remember: the goal is to kill bacteria, not your appliance!
3. STORE IT. Keep your appliance in a safe place—away from curious pets and toddlers. When you are not wearing it or cleaning it, your device should be packed away in its case or soaking overnight in water or a cleaning solution according to your original instructions.
If you have any questions about oral appliance care or oral hygiene, please contact us or schedule an appointment for a consultation. You can also learn more by reading the Dear Doctor magazine articles “10 Tips for Cleaning Your Oral Appliance” and “10 Tips for Daily Oral Care at Home.”
There’s a potential threat lurking in your young child’s mouth—tooth decay. This destructive disease can not only rob them of teeth now, it could also impact their dental health long into their adult years.
That’s why we focus heavily on decay prevention measures even in primary (“baby”) teeth, as well as early treatment should it still occur. It’s a straightforward treatment strategy: minimize the factors that contribute to disease and maximize those that protect against it.
We can represent the disease-causing factors with the acronym BAD. Bad bacteria top the list: they produce oral acid that erodes tooth enamel. Couple that with an Absence of healthy saliva function, necessary for acid neutralization, and you have the potential opening for tooth decay. Poor Dietary habits that include too much added sugar (a prime food source for bacteria) and acidic foods help fuel the decay process.
But there are also SAFE factors that can help counteract the BAD. Promoting better Saliva function helps control acid levels, while Sealants applied to chewing surfaces strengthen these vulnerable areas against decay. We can prescribe Antimicrobials in the form of mouth rinses that reduce abnormally high bacterial concentrations. Fluoride applied directly to the enamel bolsters its mineral content. And an Effective diet high in nutrition and low in sugar or acidic foods rounds out our protective measures.
Promoting SAFE factors greatly reduces the risk of childhood tooth decay. To keep on track it’s important to start regular, six-month dental visits beginning around your child’s first birthday. These visits are the most important way to take advantage of prevention measures like sealants or topical fluoride, as well as keeping an eye out for any signs of decay.
And what you do at home is just as important. Besides providing a teeth-friendly diet, you should also brush and floss your child’s teeth every day, teaching them to do it for themselves when they’re old enough. Playing it “SAFE” with your child’s dental health will help ensure your child’s teeth stay decay-free.
If you would like more information on dental care for your child, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Taking the Stress out of Dentistry for Kids.”